​Anaerobic Biogenic Promoters

1.Product Introduction：Anaerobic sludge growth promoting agents are suitable for the growth and aggregation of anaerobic sludge, thereby promoting sludge settling, promoting the generation of granular sludge, and improving the sludge concentration and COD removal efficiency of the reactor. The product contains a large amount of trace elements and nutrients that are beneficial for the growth and reproduction of anaerobic microorganisms, especially methane producing bacteria.

2.Product advantages：

(1) Better flocculation and sedimentation effects of flocs, reducing the turbidity of anaerobic reactor effluent;

(2) Significantly increase the sludge settling ratio and increase the volumetric load of anaerobic reactors;

(3) Promote the growth, reproduction, and aggregation of bacterial strains in anaerobic reactors;

(4) The product ingredients are safe, pollution-free, and have no toxic effects.

3.Product ingredients：Nutrients, trace elements, biological proteins, etc.

4.Product characteristics and specifications：Bagged, powder, net weight of 25kg.

5.Usage and dosage：Before use, it is necessary to ensure that there is a viable microbial phase in the anaerobic system, which can be directly added during use. Users can determine the appropriate concentration based on the specific dosage during actual use. The recommended initial concentration is 100ppm. After the system stabilizes, the dosage can be reduced as appropriate.

6.Storage method：Sealed and stored in a cool and dry place below 25 ℃, with a shelf life of two years.

7.matters needing attention：Avoid inhalation or skin contact. In case of accidental contact, rinse immediately with soap and water. Cannot be used together with antibacterial agents, acids, bases, or other substances that are toxic to microorganisms. For detailed application methods, please refer to the product manual or contact our company.

8.Applicable scope：This product is designed for anaerobic treatment systems in various wastewater industries and is suitable for the start-up and commissioning of anaerobic bioreactors such as UASB and EGSB, or for rapid recovery and commissioning after being impacted; It can also be used in anaerobic reaction systems with severe mud running and poor sedimentation.